CS34 Salon Table Removed

I have to have both boats ready to go into the water before we leave for Holland on April 16th, as we return the day before launch.

On the big boat, that means

• replacing the through hull transducers
• bottom paint (VC17)
• de-winterizing the engine
• taking the cover off

On the little boat, that means

• bottom paint (VC17)
• taking the shrink wrap off
• mounting the rudder & tiller
• mounting the motor
• replace jib tracks (easier on the hard)

Sunny and 10 degrees Celcius, down to the boat!

Lifted the floor boards and removed the salon table to gain easy access to the through hulls

Took the time to remove all the cabling for the depth and speed tranducer, as well as the old Silva server that they all connect to:

 Silva Instrument Server

Close up of the instrument through hulls

Pounded on the through hulls, but they would not budge.

I will have to replace the VHF and TV antenna wires are they looked very rough.

Went over to the little boat and removed the jib tracks; took a couple of hours.  The butyl tape bedding from 2009 worked perfectly!