Took the opportunity with their help and John from the club to get the mast up. We took our time and made sure the wires going down the mast didn't get pinched. I quickly hooked up the wind transducer cables and voila, celebrated with a beer with Mike.
Getting back to the slip, spent the rest of the night:
- tuning the rig
- mounting the boom and vang
- putting sails on
- hooking up outhaul and reefing lines
- running the lines back to the cockpit
- hooking up anchor/steaming/deck lights
- cleaning up wiring in salon
- cleaning up wiring in aft cabin
- mount man overboard pole
Still have lots to do before leaving for Toronto on Friday:
- cleanout cockpit lockers
- cleanout nav table
- remove tools and junk from boat
- hookup instrument bus to circuit breaker
- cover hole from bulkhead instruments
- mount BBQ
- check engine oil
- wash deck
- wash cockpit
- pump out
- re-mount toilet seat
- re-attach several bulkhead panels removed for wiring
- assemble cockpit table
- bring and blowup dinghy
- dinghy motor
- provision for the weekend
Feeling a little less overwhelmed!
Mast UP!
Sails ON!
Working wind instrument!!!
No comments:
Post a Comment