My Norcross Hawkeye depth sounder has not been working since launch.
It just reads "---" which means the transducer is not getting a reading.
Took the transducer out of the wax, and cleaned it off.
It makes its characteristic clicking sounds when held to my ear.
Hung it over the side in the water, and it still reads "---".
With the transducer in the water, power off/on the unit, it reads the correct depth for about 3 seconds, then "---". Hmmm... perhaps the transducer is TOAST.
The manual says that "---" can also be caused by dirty water, or soft bottom.
Sent a note off to tech support.
No comments:
Post a Comment