CS34 Reducing Tee for Scuppers

On the weekend I got together the parts to replace all the scupper hoses, through hulls, and add deck scuppers. 

Deck scupper, reducing tee, and through hull

Will pickup the hoses hopefully this afternoon

The deck scupper will be added between the stern cleat and the fuel fill fitting:

Above deck

Below deck

Locating the deck scupper here will kinda hide it behind the mooring lines, and the deck will drain more freely.

I don't think the deck is cored here, so should be a fairly easy install.

Getting the old and broken through hulls out was not easy.  Access is very limited. Had to use a heat gun to loosen the chalking to take the nuts off (thanks for the suggestion Tony!). 

Fashioned a homemade puller using some stuff I had in the workshop.