Peter had to have the boat lifted again, because the rudder would not come out (hitting the ground). He put some 6" blocks below the cradle to get the needed height.
Prop shaft is off to the machinists and will be ready Thursday morning. Should have the boat back in the water late Thursday or early Friday.
Peter said that the engine end was bent, and thinks that it was a problem since the boat was new. This repair is not going to be cheap, but needs to be done.
 |
| Strut with cutlass bearing removed |
 |
| Missing Rudder |
 |
| Rudder and Peter's feet |
No comments:
Post a Comment